Cool Coating, Water Proofing Coatings, Waterproofing Coating for Exterior Wall - terrace, Gujarat, India.

our products
Plasticizer And Lacquer Solvent Cement Tiles Adhesive Tiles Joint Filler Hardener For Paver Block Texture Finish Product White Cement Based Wall Putty Water Soluble Polymer Water Proofing Compound Cool Coating Concrete Hardener Rustic Adhesive for Construction Work Tiles Adhesive for Building Construction Water Proofing Compound for Construction Work

Cool Coating

Cool Coating, Water Proofing Coatings, Waterproofing Coating for Exterior Wall - terrace

Manufacturer & Exporter of Cool Coating. Our product range also comprises of Solvent Cement, Paver Material and Tiles Adhesive.

We manufacture and supply a wide range of Cool Coating that is available in different colors. These are ideal for Waterproofing of exterior terrace, walls and are executed by using acrylic emulsion polymers, micro spheres, properly selected & graded inert fillers. This coating also reduces the load on air-conditioners and keeps the interiors cool.

Features :

  • Heat Resistant
  • Dust Resistant
  • Corrosion Resistant

Shreeji-Bind Cool Coat :

  • Cool Coat is best guard for various uses. Cool Coat is useful for decreases effective temperature during hotness. It also seal the small crack upperside of the surface. it also helpful for prevent leakage.
  • Shreeji-bind COOL COAT is the most economic cool roof treatment with efficient cooling effects, easy to apply on roof of all types.
  • Cool Coat is a polymeric base material having elastomeric film forming property. That's why it makes the roof joint less.
  • Shreeji-bind Cool Coat having high reflective property gives immense indoor cooling, making the homes naturally cool without AC.

Application Guideline :

Prerequisites :

  • Surface must be cleaned by wire brush
  • Remove all dust stains, vegetative growth, efflorescence, algae
  • Wash the substrate thoroughly

Process :

  • Cool coat always use at morning or evening
  • Add 2 Its water to an empty bucket
  • Add slowly 2 kg of powder to the water with continuous stirring
  • Apply first coat of cool coat on the clean roof
  • Stirrer the solution in between the application procedure
  • Apply second coat with interval at least half hour
  • Allow to cure for 12 hrs
  • Coating should be protected from dust till wet
send enquiry